Structural epoxy system for reinforced (FRP), high strength rehabilitation and lining of tank and fluid processing and storage structures. Also terrific for lining newly constructed tank structures.
Two stage system for restoring and lining tanks with a combination of high strength mortar and hybrid epoxy top coat. Also terrific for lining newly installed infrastructure.
The Structural Epoxy System for tanks and other fluid storage structures provides the one of strongest epoxy-based rehabilitation and lining systems available in the market. Often specified for rehab projects, the system is also terrific for lining newly installed structures when installed below grade to combat high hydrostatic pressure or when high H2S is anticipated. The system’s primary technology incorporates a high build, fiber reinforced polymer (FRP) epoxy. This Epoxytec system is the highest build liner and carries the best warranty offering for Owners and end-users, when applied by Certified Applicators.
The Structural Epoxy System offers high flexural strength properties, impressive modulus and 16,000psi compressive strength for structural reclaiming needs and lining as an all-in-one-shot single system. The system is often specified for structures experiencing ultra-high levels of I&I pressure with ultra-high levels of H2S (up to 800 ppm). The Structural Epoxy System is also designed for projects requiring approval for drinking water environments; clear wells where contact with potable water is needed.
Because of its chemical resistance and strength, the system provides a best-in-class option for all facets of tank lining and rehab.
Available in both a hand/roller-applied and spray-applied versions. Also available for potable, drinking water environments (ANSI/NSF-61).
Epoxytec CPP
and/or
Epoxytec CPP Sprayable
Contents include product information and technical data sheets, execution guidelines, quality controls, case studies, and more.
ProductTAG
| Chemical corrosion resistance (H2S)¹ | Excellent |
| Sealed, I&I prevention¹ | Excellent |
| Application/ Logistical ease¹ | Good6 |
| Flexibility¹ | OK |
| Repairability/ Maintainability¹ | Excellent |
| Moisture tolerance¹ | Excellent |
| Gloss/ Build-up prevention¹ | OK |
| Return-to-service³ | 18 hours (high flow) / Immediately (low flow/stagnant water rise |
| CIGMAT, Redner or EPA-ETV verified | EPA-ETV, CIGMAT |
| “Green” – 100% solid4 | “Green” – 100% solid |
| ANSI/NSF-61 (drinking water) availability | Yes |
| Estimated material price by square foot (at minimum recommended thickness) | $5.25 – $7.40± / sq.ft. (100 mils)5,7 |
| Overall sustainability¹,² | Excellent |
| Warranty eligibility (typical extension option)8 | 10 Years |
The UME Composite System is a design system recommendation for rehabilitating and lining aged water and wastewater structures. The system also provides a proper specification for the execution of lining newly installed treatment structures. The intent of this system is to provide for the waterproofing, sealing, structural enhancement and corrosion protection of existing or newly installed tanks, processing, and treatment structures by the safe, quick and economical application of a composite created from a uniform and densely compacted epoxy-modified-cementitious layer of design formulated epoxy-modified-mortar combined with 100% solids UME hybrid epoxy – the result is a UME composite lining system.
The recommendations available with this system design establishes the minimum standard for material and methods of application for sealed corrosion protection for existing and newly installed structures. The system is designed in two stages: The high performance epoxy-modified-mortar liner is first applied onto the interior substrate prior to coating. The material will create a high bond strength layer of protection to the repairs and substrate, minimize the occurrence of outgassing, minimize as a barrier to moisture vapor transmission (MVT) and hydrostatic pressure, and be a fail-safe as a part of the first layer to seal I&I and chemical attack. The UME composite lining system is then completed with the application of a 100% solids UME hybrid epoxy.
Because of its holistic attributes, the system provides performance with economics for all facets of sewage treatment rehab/coating and for drinking water lining.
Available in both a hand/roller-applied and spray-applied versions. Also available for potable, drinking water environments (ANSI/NSF-61).
Epoxytec Uroflex
(or Epoxytec Uroflex 61 for potable water)
Contents include product information and technical data sheets, execution guidelines, quality controls, case studies, and more.
ProductTAG
| Chemical corrosion resistance (H2S)¹ | Excellent |
| Sealed, I&I prevention¹ | Excellent |
| Application/ Logistical ease¹ | OK |
| Flexibility¹ | Good |
| Repairability/ Maintainability¹ | Good |
| Moisture tolerance¹ | Good |
| Gloss/ Build-up prevention¹ | Excellent |
| Return-to-service³ | 72 hours |
| CIGMAT, Redner or EPA-ETV verified | CIGMAT |
| “Green” – 100% solid4 | “Green” – 100% solid |
| ANSI/NSF-61 (drinking water) availability | Yes |
| Estimated material price (at minimum recommended thickness)5 | $4.95± / sq.ft. (1/4″ mortar liner + 40 mils) |
| Overall sustainability¹,² | Good |
| Warranty eligibility (typical extension option)8 | 5 Years |
