17G Rapid Plus

Product Description

Epoxytec 17G™ Rapid Plus is a 3-component, 100% solids, modified epoxy system formulated to produce a moisture-tolerant, chemical resistant, ultra high density epoxy grout. The 17G™ Rapid Plus system is a structurally (17,700 psi) abrasion resistant material, with an enhanced proprietary granular blend. Modified with rapid setting curing agents, the system is utilized for projects requiring a speedy return-to-service with enhanced chemical and abrasion resistance. With a fest-setting initial cure, the system provides operational uptime benefits. Epoxytec 17G™ Rapid Plus provides an ultra-high build material with incredible corrosion protection, wear resistance and overall industrial-grade strength and durability.

Download Name Link
Product Data Sheet Download


  • “Green” – 100% solids, no VOCs
  • Excellent bearing area for even distribution of loads
  • Excellent wear and abrasion resistance
  • Excellent chemical, corrosion and impact resistance
  • Formulated resilience
  • Pre-proportioned units
  • Excellent adhesion
  • Surface & moisture tolerant
  • Fill characteristics
  • Easy to apply
  • Ultra high build
  • Structural
  • Rapid cure and return-to-service

Product Applications

  • Wear surfaces
  • Industrial floors
  • Heavy equipment areas
  • Pot holes
Typical Uses

Epoxytec 17G™ Rapid Plus is recommended to combat wear and corrosion. Great for most industrial applications such as large aggregate transportation, solid waste tipping/transfer floors, heavy equipment areas, processing plants, etc. Great for rapid return-to-service, pot hole repairs.

Surface Prep

The success of any coating application is directly proportional to the completeness of the substrate preparation and the care the application crew puts into the application. Surface must be clean and sound. Remove all dust, contaminants, grease, curing compounds, rust, impregnation, waxes, foreign particles, and disintegrated materials from the surface, in order to achieve a clean and profiled surface.

Concrete: Prepare the concrete by abrasive blasting, high pressure water cleaning (>5000 psi), and/or approved mechanical methods to meet the standards of SSPC-SP 13/NACE No. 6. “Surface Preparation of Concrete.” Consider the use of an Epoxytec primer to eliminate off-gassing.

Application Method

Epoxytec 17G™ Rapid Plus is a slurry grout consistency often used to pour and spread. If considering to “form,” consider utilizing Epoxytec 17G™ Flow version. IMPORTANT: Precondition all components to 70°F+ for 24 hours before using. Remove from the pail all three components. Pour the A & B Component into the pail & mix with a “Jiffy Mixer” blade attached to a 3/4 drill motor for two minutes. Immediately add entire contents of the aggregate component. Mix again for 4 minutes.

Film Thickness

Epoxytec 17G™ Rapid Plus can be a single coat or a multiple coat system. 17G™ Rapid Plus can be applied onto a surface at 1/2” (minimum) – 12” (maximum) per coat. For a total coating thickness exceeding 12”, multiple coats are necessary.

Storage & Handling
Shelf life: 12 months, sealed. Storage: Store in a dry area away from direct sunlight.

17G Rapid Plus

Epoxytec 17G™ Rapid Plus is a 100% solid epoxy, designed as a 3-component, slurry-grade, high media filled polymer for topping or cladding with rapid curing properites and enhanced performance properties.  The 17G™ Rapid Plus system is formulated to provide a high build, sealed, protective and abrasion resistant epoxy slab for wear areas requiring sealed protection.

The 17G™ Rapid Plus technology is unique and proprietary, ultra-dense with excellent tolerances and enhanced properties. 17G™ Rapid Plus is formulated “green,” environmentally friendly, 100% solid (no VOCs, no solvent). The 17G™ Rapid Plus system is easy-to-apply trowel and able to be applied high build. For long-term maintainability, the 17G™ Rapid Plus system ties back into itself indefinitely with no need for re-blasting or abrasion.